I tried but failed!

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Find all posts by this user
01-13-2017, 02:34 PM
Post: #1
I tried but failed!
Quote this message in a reply
Well I tried going out to the test bed marked the coin locations and was about to do my first video but.... its 28 in the sun and I was next to a garage in the shade fingers were numb had trouble holding the phone so I think I will wait alittle longer before I show the f75 se with dst and the Ace400 with custom shaft in action. The LG G4 makes nice video's even if I have a face for radio. For now here they are I atleast got them outside for a few swings.
   

Cladjunky From Cleveland Mooning
Makro Racer with 7x11 coil
F75 with 11 inch and 15 inch coil DST
RT6DETECTORS.COM for the best deals!
AT Pinpointer and Lesche 31 inch
Find all posts by this user
01-13-2017, 02:51 PM
Post: #2
RE: I tried but failed!
Quote this message in a reply
I got a pair of gloves for you that you'll love. As ham fisted as you are I think large will work. Nice try by the way. I'm just now heading out.

Ed

MineLab SE Pro w/11" Pro, 12x10 SEF, 8x6 SEF, Explorer 1000
Garrett AT PRO, w/8.5x11, 5x8, Deteknix Wireless, RnB Recharge (2).
Delta 4000, w/8" concentric, 13" Ultimate, 5x10 DD.
Garrett PP, & Pro Pointer AT.
Leusch, Hori Digger (2), Sampson Ball Handle Shovel.
Find all posts by this user
01-13-2017, 03:04 PM
Post: #3
RE: I tried but failed!
Quote this message in a reply
Thanks Ed but I think I'm going to stay 40 plus before I go out no hurry and after turning Iron Audible on the Ace400 showed a TON of iron in my testbed Happy yet it still pulled the 8 inch quarter and wheat out! The fisher I was messing with options but I got all 5 items 8 inch 67 half,clad quarter,dime,wheat penny,nickle even in the trash just have to pay attention do the tones 3h tone setting puts nickles in the high tone level used de mode which is the standard one for all seaching have to see what je-jewelry bc-bottlecap fa-fast mode and pf-plowed field does not to mention all metal static/motion its going to be fun the first few weeks for sure!

Cladjunky From Cleveland Mooning
Makro Racer with 7x11 coil
F75 with 11 inch and 15 inch coil DST
RT6DETECTORS.COM for the best deals!
AT Pinpointer and Lesche 31 inch
Find all posts by this user
01-13-2017, 07:04 PM
Post: #4
RE: I tried but failed!
Quote this message in a reply
Don't fret the clad will be there when you are ready.

Bigtony, member of Treasure Classifieds Forum since Jan 2015.
Find all posts by this user
01-13-2017, 07:26 PM
Post: #5
RE: I tried but failed!
Quote this message in a reply
Nice detectors and custom shaft. Gloves do make a big difference. I can't go out without them. Sometimes even a face mask is also a must. Hopefully you can test them out soon!

Zachbl92, proud to be a member of Treasure Classifieds Forum and detectorist since Nov 2015.
Garret At Pro(12x13, 8.5x11, 5x8, 4.5") Garret At Pinpointer, GG original headphones, Predator Piranha/Little Eagle T shovel, Lesche hand digger.
Button Count FTY: Lost count
Visit this user's website Find all posts by this user
01-13-2017, 08:18 PM
Post: #6
RE: I tried but failed!
Quote this message in a reply
Throw one of those hand warmer packs in each glove, you'll feel like you're in a sauna. Looking forward to seeing the video.

NjNyDigger, proud to be a member of Treasure Classifieds Forum since 2013.

[Image: image.jpg]
Find all posts by this user
01-13-2017, 08:27 PM
Post: #7
RE: I tried but failed!
Quote this message in a reply
I hope you get an opportunity to do some testing and digging soon. I'm looking for good results from your new detectors. I know what you mean about the cold fingers; I have to do my auto repairs outside and so many times my hands are just too numb to be of use. Still very impressed with your shaft mods.

shadeseeker, proud to be a member of Treasure Classifieds Forum since Oct 2015.
Find all posts by this user
01-13-2017, 10:14 PM
Post: #8
RE: I tried but failed!
(This post was last modified: 01-13-2017 10:17 PM by Cladjunky.)
Quote this message in a reply
I want to try a Video but alittle warmer I think till then I will practice some editing so i can make it look alittle smoother Happy Thanks for the kind words on the Ace400 shaft it makes a huge difference with the balance of the machine Pennypop will test it this spring/summer Happy I am considering practicing some Aluminum welding and designing a really light one.

Cladjunky From Cleveland Mooning
Makro Racer with 7x11 coil
F75 with 11 inch and 15 inch coil DST
RT6DETECTORS.COM for the best deals!
AT Pinpointer and Lesche 31 inch
Find all posts by this user
01-13-2017, 11:08 PM
Post: #9
RE: I tried but failed!
(This post was last modified: 01-13-2017 11:11 PM by Digsit.)
Quote this message in a reply
Just a couple hours west of you and they are predicting a warm upcoming week , I hope it gets to you. I like the shaft mod also. I also have a "face for radio" , but also the luck of the Irish , when I try to make a video the finds just don't justify posting it anywhere , if I leave the camera behind at least I have a chance.
Pat

Digsit, proud to be a member of Treasure Classifieds Forum since Feb 2016.
Remember for the good of the hobby It is better to ask for permission than to beg for forgiveness.
Post Reply 




User(s) browsing this thread: 1 Guest(s)